Description
Powerful 4 Burner Built-In BBQ for Outdoor Kitchens
The Beefeater Signature 3000E 4 Burner Built-In BBQ (BS19942) combines powerful gas cooking with Beefeater’s proven cast-iron cooking system and distinctive black vitreous enamel finish.
Four 19 MJ/hr cast-iron burners deliver an impressive 76 MJ/hr total burner output, providing plenty of heat for everything from high-temperature steak and burgers to everyday family BBQs and hood-down roasting.
The Signature 3000E also features Beefeater’s Vaporizer® Grid & Reflector System with Anti-Flare Technology, designed to reduce flare-ups and heat loss while improving cooking efficiency. Add a porcelain-enamelled cast-iron cooktop, Quartz Start ignition and an integrated roasting hood with viewing window, temperature gauge and warming rack, and you have a versatile built-in BBQ designed for permanent outdoor-kitchen installations.
Why Choose the Beefeater Signature 3000E 4 Burner?
The Signature 3000E combines high-output cast-iron burners with a straightforward, durable cooking system.
Key Features
- 4 × 19 MJ/hr cast-iron burners
- 76 MJ/hr total burner output
- Black vitreous enamel finish
- Rust-resistant porcelain-enamelled cast-iron cooking surface
- Vaporizer® Grid & Reflector System
- Anti-Flare Technology
- Integrated convection roasting hood
- Hood viewing window
- Integrated temperature gauge
- Large removable warming rack
- Quartz Start ignition
- Front-mounted controls
- Grease collection tray
- Hood-up or hood-down cooking
- LPG configuration
- Natural Gas conversion available
- BS19942 model
Beefeater identifies the convection roasting hood, cast-iron cooktop, Quartz Start ignition, Vaporizer Grid & Reflector System and large removable warming rack as the model's primary features.
Four Powerful 19 MJ/hr Cast-Iron Burners
The BS19942 is equipped with four cast-iron burners, each producing:
19 MJ/hr
Together they provide:
76 MJ/hr Total Burner Output
That is a considerable amount of heat from a four-burner built-in BBQ and is one of the strongest selling points of the Signature 3000E.
Independent burner control also lets you establish different cooking zones.
Turn up the heat for:
- Steak
- Burgers
- Lamb
- Kebabs
- Seafood
- High-temperature grilling
Or use lower and indirect heat for:
- Chicken
- Sausages
- Vegetables
- Roasts
- Larger cuts
- Hood-down cooking
Durable Porcelain-Enamelled Cast-Iron Cooktop
The Signature 3000E uses a rust-resistant porcelain-enamelled cast-iron cooking surface.
Beefeater describes porcelain-enamelled cast iron as one of its toughest cooktop coatings, combining the excellent heat retention of cast iron with a durable protective surface.
This makes it well suited to regular BBQ cooking where strong, consistent heat is important.
Vaporizer® Grid & Reflector System
One of the defining features of the Signature 3000E is Beefeater’s Vaporizer® Grid & Reflector System.
The system works in conjunction with the burners to manage heat across the cooking area and is paired with Beefeater's Anti-Flare Technology.
For customers comparing this BBQ with more basic gas BBQs, this is an important feature to highlight because it forms a core part of the 3000E cooking system.
Anti-Flare Technology
Beefeater specifically states that its Anti-Flare Technology reduces flare-ups and heat loss, helping provide faster cooking and improved fuel economy.
This is particularly useful when cooking fatty foods such as:
- Sausages
- Burgers
- Lamb
- Chicken
- Marinated meats
Reducing uncontrolled flare-ups helps give you greater control over the cooking process and reduces the likelihood of food being scorched by sudden flames.
Integrated Convection Roasting Hood
The BS19942 features an integrated convection roasting hood finished in easy-clean vitreous enamel.
Close the hood and use the BBQ for:
- Whole chicken
- Roast meats
- Larger cuts
- Indirect cooking
- Hood-down grilling
- Slower BBQ cooking
This makes the Signature 3000E considerably more versatile than an open grill alone.
Hood Viewing Window
The roasting hood includes a built-in viewing window, allowing you to monitor food while keeping the hood closed.
This is particularly useful during:
- Roasting
- Whole chicken cooks
- Larger cuts
- Longer hood-down cooking
Keeping the hood closed helps maintain a more stable cooking environment rather than continually releasing heat to check your food.
Integrated Temperature Gauge
An integrated temperature gauge is built into the roasting hood.
Together with the viewing window, this gives you an easy way to monitor your hood-down cooking without constantly opening the barbecue.
Large Removable Warming Rack
The Signature 3000E includes a large removable warming rack above the main cooking surface.
Use it for:
- Keeping cooked meat warm
- Warming bread and burger buns
- Holding sausages
- Resting food
- Moving food away from direct heat
The rack can be removed when you need additional vertical space under the roasting hood.
Integrated Quartz Start Ignition
The BS19942 uses Beefeater’s Quartz Start ignition system.
Beefeater describes it as a titanium-coated ignition system designed for durable, hassle-free starting.
That means getting the BBQ fired up is quick and straightforward without relying on external ignition sources.
Black Vitreous Enamel Finish
The BS19942 is finished in black vitreous enamel, giving the Signature 3000E its distinctive appearance.
The black finish works particularly well with:
- Black outdoor-kitchen cabinetry
- Charcoal cabinetry
- Dark stone benchtops
- Light stone for contrast
- Contemporary alfresco areas
It is also an alternative for customers who don't want the predominantly stainless steel appearance found on many built-in BBQs.
Designed for Built-In Outdoor Kitchens
The BS19942 is specifically designed as a built-in BBQ, making it suitable for integration into an outdoor kitchen or purpose-built BBQ cabinet.
The official Beefeater page currently lists the overall appliance at 854mm wide × 591mm deep, although Beefeater's downloadable fact-sheet data indexed elsewhere lists 816mm wide × 570mm deep. Because those official/current data points conflict, I would not use the overall dimensions for cabinetry design without checking the current installation manual or physically confirming the appliance.
This is especially important for an existing stone cut-out.
LPG with Natural Gas Conversion Available
The BS19942 comes configured for LPG.
It can also be converted to Natural Gas using the Beefeater BS95167 Natural Gas Conversion Kit for Signature 3000E BBQs. Beefeater confirms that this kit is compatible with the BS19942 and includes the required hose and injector.
Gas conversion and connection should be carried out in accordance with Beefeater's instructions and applicable Australian gas requirements.
Compatible Rear Heat Shield
Beefeater lists the BA10RHS Rear Heat Shield as compatible with the BS19942 for outdoor-kitchen installations.
Heat shields and manufacturer-specified clearances are particularly important when integrating a gas BBQ into cabinetry.
Always use the current Beefeater installation manual when designing the surrounding cabinet, stone and combustible clearances.
Signature 3000E vs Beefeater 1200 Series 4 Burner
Although both are four-burner built-in Beefeater BBQs, there are some significant differences.
Signature 3000E BS19942
- 4 × 19 MJ/hr burners
- 76 MJ/hr total output
- Black vitreous enamel finish
- Vaporizer® Grid & Reflector System
- Anti-Flare Technology
- Convection roasting hood
- Viewing window
- Quartz Start ignition
1200 Series 4 Burner
- 4 × 15 MJ/hr burners
- 60 MJ/hr calculated main burner output
- Available in stainless or black finishes
- Cast-iron cooking surfaces
- Viewing window
- Quartz Start ignition
The 3000E has considerably higher burner output, with 19 MJ/hr available from each burner compared with 15 MJ/hr on the current 1200 Series.
Specifications
| Feature |
Specification |
| Product |
Beefeater Signature 3000E 4 Burner Built-In BBQ |
| Model |
BS19942 |
| BBQ Type |
Built-In |
| Design Family |
Signature |
| Finish |
Black Vitreous Enamel |
| Fuel |
Gas |
| Gas Setup |
LPG |
| Natural Gas Conversion |
Yes – BS95167 |
| Number of Burners |
4 |
| Burner Material |
Cast Iron |
| Burner Output |
19 MJ/hr each |
| Total Burner Output |
76 MJ/hr |
| Ignition |
Quartz Start |
| Vaporizer System |
Yes |
| Anti-Flare Technology |
Yes |
| Cooking Surface |
Porcelain-Enamelled Cast Iron |
| Roasting Hood |
Yes |
| Hood Construction |
Vitreous Enamel |
| Viewing Window |
Yes |
| Temperature Gauge |
Integrated |
| Warming Rack |
Large Removable |
| Grease Collection Tray |
Yes |
| Hood-Up Cooking |
Yes |
| Hood-Down Cooking |
Yes |
| Flame Failure |
No |
| Side Burner |
No |
| Controls |
Rotary Knobs |
| Control Position |
Front Mounted |
The burner, fuel, finish and feature specifications above are confirmed by Beefeater's current Australian product page and official BS19942 fact-sheet data.
Perfect For
- Built-in outdoor kitchens
- Family BBQs
- Alfresco entertaining
- Black outdoor kitchens
- Steak and high-temperature grilling
- Burgers
- Sausages
- Chicken
- Seafood
- Breakfast cooking
- Roasting
- Indirect cooking
- LPG installations
- Natural Gas installations with conversion
Why Buy the Beefeater Signature 3000E From Hot Things?
Hot Things specialises in Beefeater built-in BBQs and custom outdoor kitchens in Perth.
The Signature 3000E BS19942 is particularly appealing if you want a powerful built-in four-burner BBQ with a black finish. Its 19 MJ/hr cast-iron burners, 76 MJ/hr total output and Vaporizer® Grid & Reflector System with Anti-Flare Technology give it a strong cooking specification for its size.
It can also be incorporated into a complete outdoor kitchen with cabinetry, stone benchtops, outdoor refrigeration, sinks, storage and other outdoor appliances.
Frequently Asked Questions
How many burners does the Beefeater BS19942 have?
The Signature 3000E BS19942 has four cast-iron burners.
How powerful are the burners?
Each burner produces 19 MJ/hr, giving the four burners a combined output of 76 MJ/hr.
What is Beefeater Anti-Flare Technology?
The BS19942 uses Beefeater's Vaporizer® Grid & Reflector System with Anti-Flare Technology. Beefeater says the system reduces flare-ups and heat loss, supporting faster cooking and improved fuel economy.
What are the burners made from?
The four main burners are cast iron.
What is the cooking surface made from?
The cooking surface uses rust-resistant porcelain-enamel-coated cast iron.
Can you roast in the Beefeater Signature 3000E?
Yes. The integrated convection roasting hood supports both hood-up and hood-down cooking, allowing the BS19942 to be used for roasting and indirect cooking as well as conventional grilling.
Does the BS19942 have a viewing window?
Yes. The roasting hood includes a viewing window, allowing you to check your food without continually opening the hood.
Does it have a temperature gauge?
Yes. An integrated temperature gauge is built into the roasting hood.
Does the BS19942 have a warming rack?
Yes. It includes a large removable warming rack.
What ignition system does it use?
The BS19942 uses Beefeater's Quartz Start ignition system.
Does the BS19942 have flame failure?
No. Beefeater lists Flame Failure: No for this model.
Is the BS19942 LPG or Natural Gas?
It comes configured for LPG. It can be converted to Natural Gas using the compatible Beefeater BS95167 Natural Gas Conversion Kit.
What rear heat shield fits the BS19942?
Beefeater lists the BA10RHS Rear Heat Shield as compatible with the BS19942.
Is the BS19942 suitable for an outdoor kitchen?
Yes. The BS19942 is specifically a built-in BBQ and can be incorporated into an appropriately designed outdoor kitchen. Manufacturer installation instructions, ventilation requirements and clearances must be followed.
